ARCO Product Line
I Mica I Ceramic I Film I Tantalum I Filters I Special Offers I
I Product Line by Part Number Prefix I
Contact & Distribution
I Contact Information I Distributors by Area I Distributor Price List I
Quotes & Orders
I Request for Quote I Purchase Orders I SEARCH I

 

Dipped Mica Tape & Reel

Specifications | Tape & Reel


LIFE TEST

Capacitors shall be subjected to a temperature of 125° with 150 percent of the rated voltage for 2000 -72/-0 hours. After testing, the following requirements shall be satisfied.
VISUAL EXAMINATION: There shall be no cracks or other mechanical damage.
WITHSTANDING VOLTAGE: Capacitors shall withstand twice the rated voltage for one to five seconds without damage, arcing or breakdown.
INSULATION RESISTANCE: Shall not be less than the value in fig.4
DISSIPATION FACTOR: Shall not exceed 150 percent of the value in fig.6
CAPACITANCE CHANGE: Shall not exceed +/- 3% for characteristic C and +/- 2% for characteristic D, E, F or +/- 1pF, whichever is greater.
MOISTURE RESISTANCE LOADING
Capacitors shall be subjected to a temperature of 40° +/- 2°C, at 90 to 95% relative humidity for a period of 4 to 24 hours, the following requirements shall be satisfied.
VISUAL EXAMINATION: There shall be no cracks or other mechanical damage.
WITHSTANDING VOLTAGE: Capacitors shall withstand twice the rated voltage for one to five seconds without damage, arcing or breakdown.
INSULATION RESISTANCE: Shall not be less than the value in fig.5
DISSIPATION FACTOR: Shall not be less than the value in Fig.6
CAPACITANCE CHANGE: Shall not exceed +/-5% or +/- 1pF, whichever is greater.

COMPONENT MARKING

Item
DM15

Characteristic

Indicated with one of characteristic indication marks: C, D, E, F

Nominal Capacitance

Identified by a three-digit number; the first two represent significant figures in pF and the last digit specified the number of zeros to follow

Capacitance Tolerance

The tolerance is indicated by Capital Letter, ie D=(+/-0.5pF), F=(+/-1%), G=(+/-2%), J=(+/-5%), K=(+/-10%)

Rated Voltage

100wv and 300wv are indicated as 1 and 3 respectively. 500wv omitted.

Manufacturer's Mark

AE (Arco Electronics)

 

Item Symbol

Specifications

Value

Tolerance
Body width A1 W Max.
Body Height A H Max.
Body Thickness T T Max.
Lead-wire diameter1 D 0.5 ± 0.05
Pitch of component2 P 12.7 ± 1.0
Sprocket hole pitch5 Po 12.7 ± 0.3
Lead Location P1 3.85 ± 0.7
Hole center to component center P2 6.35 ± 1.3
Component lead spacing F 5.0 +0.6

-0.2
Deflection4 s h 0 ± 2.0
Carrier tape width W 18.0 ± 1.0

-0.5
Hole-down tape width Wo 12.5 Min
Sprocket hole location W1 9.0 ± 0.5
Adhesive tape border W1 3.0 Max
Length from scathing plans H 16.0 ± 0.5
Lead-wire protrusion 1 2.0 Max
Sprocket hole diameter Do 4.0 ± 0.2
Overall tape thickness T 0.7 ± 0.2
Cut out length L 11.0 max
  1. CP wires
  2. Cumulative pitch error: 1.0mm/20pitch
  3. To be measured at bottom of clinch.

  4. At top center of components

  5. No adhesive may be exposed.

 

 

 


Back to the Top

Specializing in Capacitors for 50yrs

© Arco Electronics, Inc.
I www.arcoelectronics.com I www.arco-electronics.com I

 
  Help

http://members.hostedscripts.com/antispam.html

.